Basic Info.
Kind
Two-wire Transmitter
Wire-Assembly Type
Two-wire Transmitter
Specification
12.8*115*100
Product Description
THS-IP series current input distribution isolator, using DC24V power supply, provides isolated distribution power supply for the field transmitter, and transmits the current signal generated by the transmitter from the field isolation to the control room, PLC, DCS and so on.
Input interface current source, two-wire system, three-wire system transmitter is used in general; the internal use of efficient magnetoelectronic isolation technology, input, output, power supply isolation between each other, with high accuracy, high linearity, extremely low temperature drift, short response time and other characteristics.
DIN guideway independent installation mode; 12.8mm ultra-thin shell, using the latest energy-saving circuit, almost no heat emission, minimal temperature rise, suitable for intensive installation of guideways.
| Input and output specifications of products |
| THS-IP | X | X | X | instructions |
| Channel configuration | 5 | | | 2 input/2 output |
| Output signal | 1 | | 4-20mA |
| 2 | | 0-20mA |
| Input signal | 1 | 4-20mA |
| 2 | 0-20mA |
| 4 | 0-5V |
| 6 | 0-10V |
| Note: customers need to determine the form of input signal and output signal when ordering, and can customize if there are special needs |
Product selection:
THS-IPXXX
Example: THS-IP511, 1 input/1 output, both input and output are 4-20 mA
| Main technical parameters |
| Input |
| Input signal:4~20mA ;0~20mA |
| Maximum input current:25mA |
| Voltage output impedance:≥21VDC |
| Input impedance:≤25Ω |
| Output |
| Output signal:4~20mA ;0~20mA; 0~5V; 0~10V |
| Maximum output current:25mA |
Allowed output load resistance:
RL≤800Ω(The output is a current signal)
RL≥1MΩ(The output is a voltage signal) |
| Output ripple:≤ 10mVp-p |
| |
| General technical parameters |
The channel number:
2 input/2 output(THS-IP5XX) |
| Power supply:DC20V,Voltage range:DC20~40V |
Electricity(consumption)current:
≤93mA(2 input/2 output, 24V power supply,distribution input, 20mA output, load resistance = 550Ω) |
| Basic precision:±0.1%F.S |
| Temperature drift:Typical value≤±1uA/10ºC |
| Response time:≤10mS(0-90%)(TYP) |
| Stabilizing time:≤1S |
| Dielectric strength:2500V AC/1 min(among input/output/power supply) |
| Insulation resistance:≥100MΩ(among input/output/power supply) |
| Operating temperature range:-20~+55°C |
| Electromagnetic compatibility:in accord with GB/T18268(IEC61326-1) |
| Suit for field equipment :Two wire transmitters;Current source. |
| Protection parameters |
| Power on shock protection, slow start > 20ms |
| Power supply reverse connection protection, reverse connection voltage < -40V |
| Power distribution protection, power distribution output clamping current 28mA (±4mA) |
| Output protection, output clamping current 25mA(±1mA) |
| End miscommunication and surge protection |
| A. Between the two ports of the power supply -- input-output self-loop, the voltage of the outer loop can withstand < ±24 |
| B. Input - output - power three between the formation of a short circuit, open circuit, no damage. Withstand external voltage 2500V (1 min, no damage) |
Address:
Floor 4 of Building 5th Place 1st Youth E-Commerce Industrial Park East Office of Suzhou City Anhui Province
Business Type:
Trading Company
Business Range:
Electrical & Electronics
Company Introduction:
Our company offers variety of products which can meet your multifarious demands. We adhere to the management principles of "quality first, customer first and credit-based" since the establishment of the company and always do our best to satisfy potential needs of our customers. Our company is sincerely willing to cooperate with enterprises from all over the world in order to realize a win-win situation since the trend of economic globalization has developed with anirresistible force.
){kind=link}