Basic Info.
Specification
114.5*35*99
Product Description
Switch value input, relay input to barrier, receive the switch or proximity switch input of basket danger area, and transmit it to relay input at safety side through barrier isolation. It has the function of input disconnection detection alarm indication and input / output reverse phase setting.
The product needs independent power supply, power supply, input and output isolation.
DIN rail independent installation
Product model list |
TGP-SD | X | X | X | Instructions |
Channel configuration | 1 | | | 1 input/1 output |
2 | | | 1 input/2 output |
5 | | | 2 input/2 output |
Input Signal | | | Switching quantity |
Output Signal | | Relay |
Note: customers need to determine the form of input signal and output signal when ordering, and can customize if there are special needs |
Product selection:
TGP-SDXXX
Example: TGP-SD1SJ,Switch input, relay output barrier, 1 input/1 output ,Switch input, relay output
Main technical parameters |
Power supply voltage:20~35V,d.c. |
Power protection: power reverse protection |
Current consumption (24V power supply, when the relay contact is closed): ≤40mA(TGP-SD1SJ);≤60mA(TGP-SD2SJ) ≤65mA(TGP-SD5SJ) |
Dangerous side: |
Input : Switch, proximity switch, frequency ≤10Hz |
Open circuit voltage:≈8V Short-circuit current:≈8mA |
Safety side: |
Driving ability:250V,a.c.,2A or 30V,d.c. 2A;Resistive load |
Response time :≤20ms |
Input and output characteristics(When set to in-phase control): |
Field switch closed or input loop current>2.1mA.Output relay closed, channel yellow, indicator light on Field switch open circuit or input circuit current<1.2mA,Output relay open circuit, channel yellow indicator off |
Input and output invert control settings: |
Set by panel fluctuation switch K1 K2, see attached manual for details |
Setting of disconnection detection function(Just TGP-SD1SJ,TGP-SD2SJ): |
Set by panel fluctuation switch K3, see the attached manual for details |
For switch input, 10K Ω resistor shall be connected in parallel at both ends of the switch when disconnection detection function is required(As shown in the wiring diagram, switch II) |
Insulation strength:2500V,a.c.;1min |
Electromagnetic compatibility:in accord with GB/T18268.1(IEC61326-1) |
Operating temperature range:-20~+55°C |
Connected field equipment and area: |
Comply with din19234 Namur proximity switch, switch and other field equipment (including intrinsically safe pressure switch, temperature switch, liquid level switch, etc.) |
Zone 0, 1, 2, IIA, IIB, IIC, T4 ~ T6 |
Explosion proof certification |
Certification of national instrument explosion-proof safety supervision and inspection station (NEPSI) |
Max Voltage(Um):250V |
Explosion proof sign:(Ex ia) IIC |
Authentication parameter |
terminal(1,2),(3,4) |
Uo=10.5V , Io=14mA,Po=37mA |
IIC:Co =2.4µF,Lo=165mH |
IIB:Co =7.2µF,Lo=840mH |
IIA:Co =19.2µF,Lo=1320mH |
Address:
Floor 4 of Building 5th Place 1st Youth E-Commerce Industrial Park East Office of Suzhou City Anhui Province
Business Type:
Trading Company
Business Range:
Electrical & Electronics
Company Introduction:
Our company offers variety of products which can meet your multifarious demands. We adhere to the management principles of "quality first, customer first and credit-based" since the establishment of the company and always do our best to satisfy potential needs of our customers. Our company is sincerely willing to cooperate with enterprises from all over the world in order to realize a win-win situation since the trend of economic globalization has developed with anirresistible force.